Firmware Update

Latest Version: v1.1.0
Windows Download Mac Download


At La Forge FPV we are constantly looking for new ways to give you the competitive edge you can only get from our products.

As a value add feature you will find a convenient 6 pin ISP programming port for uploading new firmware. These firmware upgrades are one way we like to say thank you for being a loyal customer.


Use the links above to download the firmware update software. Once downloaded unzip the contents and run the "LaForgeUpdate.exe" application then follow the in app instructions.

You may need the following derivers to enable the Flash button.
Zadig Driver Installer
Select USBasp from the dropdown list and reinstall the "libusb-win32" or "WinUSB" driver.

Be sure your firewall rules allow for internet access so the application can download the latest firmware version.

Once the firmwares are downloaded the application will keep a local cache on your computer so you can do offline updates.

General Notes & Disclaimers

This application and firmwares are provided AS-IS and should only be used on official LaForge FPV hardware, upload at your own risk.

Always disconnect the product from any circuit before performing the firmware upload.

Video Overview

Hardware Requirements

V1-V3 Main Module with 6 pin ISP
(Click here for V4 hardware updates)

System Requirements

Windows 7 or higher
OS X 10.8 or higher.
Hard Drive Space about 50MB
USB 2.0 or higher.
First use requires internet access.

Additional Tools Required

USBasp 2.0 ISP Programmer with 10pin to 6pin adapter.

Firmware Details

Main Firmware
RF Analyzer
RF Lap Timer
Capture & Defend
rx5808-pro-diversity (Open Source)


Electron app developed by Andrew Baum.